6.6.7 Packet Tracer - Configure Pat.pka Apr 2026

If you’ve just finished the CCNA switching and routing basics, you’ve probably hit . It looks simple at first, but PAT (Port Address Translation) is what makes your home router work — mapping many private IPs to one public IP using different ports.

R1(config)# ip nat inside source list 1 interface serial 0/1/0 overload This means: Take any packet from ACL 1, translate its source IP to the S0/1/0 interface IP (209.165.200.226), and keep track by port number. From PC1, PC2, and Laptop, ping 209.165.200.225 . 6.6.7 packet tracer - configure pat.pka

R1# show ip nat translations You should see something like: If you’ve just finished the CCNA switching and

R1(config)# interface g0/0 R1(config-if)# ip address 192.168.1.1 255.255.255.0 R1(config-if)# no shutdown R1(config)# interface s0/1/0 R1(config-if)# ip address 209.165.200.226 255.255.255.252 R1(config-if)# no shutdown This is critical — PAT won’t work if you don’t tell the router which side is “inside” and which is “outside.” From PC1, PC2, and Laptop, ping 209