Ch-899 Chouchin Radio Controlled Clock — Manual

Pressing this forces the clock to try searching for the radio signal again. Try placing the clock near a window facing towards the signal transmitter while doing this.

Open the back compartment and insert fresh AA batteries (alkaline is best). The Auto-Sync:

Press and hold this for a few seconds to move the hands manually to the current time. REC Button:

Keep the clock at least six feet away from computers, TVs, or routers, as these can interfere with the internal antenna. ch-899 chouchin radio controlled clock manual

This can take anywhere from 3 to 12 minutes. If it finds the signal, the hands will automatically fast-forward to the correct time. 2. Manual Setup (If the signal is weak)

Whether you’ve just unboxed your CH-899 Chouchin or finally decided to fix that blinking time display, setting up a radio-controlled clock is actually pretty straightforward. Since these clocks rely on the DCF (Germany)

Is your clock currently stuck at a specific time, or is it just not picking up the signal at all? Pressing this forces the clock to try searching

If the clock is acting glitchy, use a paperclip to press the Reset hole. This clears the memory and starts the auto-sync process from scratch. 3. Tips for Success Night Sync:

Once the batteries are in, the hands will usually spin automatically to the 12:00, 4:00, or 8:00 position. Do not touch the hands.

If the hands don't move after 15 minutes, you might be in a "dead zone" (near thick stone walls or heavy electronics). M.SET Button: The Auto-Sync: Press and hold this for a

Here is a quick guide to getting your CH-899 up and running. 1. The Initial Startup Insert Batteries:

The clock is now in "receiving mode," searching for the radio signal.

Radio signals are strongest at night. If it doesn't set during the day, leave it by a window overnight; it usually corrects itself by 4:00 AM.