Ch9200 Usb Ethernet Adapter Driver For Windows 11 [2026]

If you frequently plug the adapter into different Windows 11 PCs, avoid CH9200. Spend a few dollars more for a Realtek RTL8153 or ASIX AX88179 adapter for native plug-and-play. 8. Summary | Aspect | Details | |--------|---------| | Native support in Windows 11 | ❌ No | | Driver available | ✅ Yes, from WCH | | Installation difficulty | Moderate (manual driver install) | | Performance | Adequate for 100 Mbps, not Gigabit | | Reliability on Win11 | Acceptable after driver installation, but occasional sleep/resume issues | | Recommendation | Only for existing adapters; avoid for new purchases |

| Chip | Native Win11 Driver | Gigabit | WoL | Cost | |------|---------------------|---------|-----|------| | | ✅ Yes (inbox) | ❌ Fast Ethernet | ✅ | Low | | Realtek RTL8152B | ✅ Yes (inbox) | ❌ Fast Ethernet | ✅ | Low | | Realtek RTL8153 | ✅ Yes (inbox) | ✅ Gigabit | ✅ | Medium | | ASIX AX88179 | ✅ Yes (inbox) | ✅ Gigabit | ✅ | Medium | | CH9200 | ❌ No | ❌ 100M | ❌ | Very low | ch9200 usb ethernet adapter driver for windows 11

The CH9200 can work on Windows 11 with the correct driver from WCH. However, it is not a smooth experience compared to mainstream chips. Use only if you already own the adapter; otherwise, buy a Realtek or ASIX-based adapter for native Windows 11 support. If you frequently plug the adapter into different

The CH9200 is a USB-to-Ethernet controller chip manufactured by Jiangsu Qin Heng (WCH) . It provides a low-cost, single-chip solution for 10/100 Mbps Ethernet over a USB interface (usually USB 2.0). It is commonly found in inexpensive USB Ethernet dongles from brands like UGREEN, CableCreation, and no-name generic adapters. Summary | Aspect | Details | |--------|---------| |

The CH9200 is a low-performance chip. It achieves ~90–95 Mbps in real-world TCP throughput on USB 2.0. CPU usage is moderate. Not suitable for Gigabit Ethernet (it does not support Gigabit at all). 6. Known Issues on Windows 11 | Issue | Description | Workaround | |-------|-------------|-------------| | Driver fails to install | Windows blocks unsigned or older drivers | Disable Secure Boot temporarily, or use driver signature enforcement override | | Adapter not recognized after sleep/resume | Driver doesn't handle USB selective suspend properly | Unplug and replug the adapter, or disable USB selective suspend in Power Options | | Limited link speed | Shows 10 Mbps only | Check cable quality; force 100 Mbps Full Duplex in adapter properties | | DHCP fails or slow IP acquisition | Intermittent | Set static IP or restart dhcp client service | | Driver conflict with other WCH devices | Rare | Install latest driver v2.1.0.0 or newer | 7. Alternatives to CH9200 Given the driver hassle and low performance on Windows 11, consider replacing the adapter with one based on better chips: