The fault is intermittent. Sometimes it runs for 20 minutes, other times it cuts out immediately. Diagnostic tools seem inconsistent, and the "Battery Charging Fault" stays even after a new battery is fitted. Has anyone fixed this specific DTCC 10000 code? I’m suspicious of a wiring loom fault internal ECU/UPC issue
Inspect the loom behind the battery and near the ECU for rubbing/chafing. CAN Resistance:
The fault code DTCC 10000 on a Renault (most commonly the Trafic 3 1.6 dCi ) typically points to a dtcc 10000 renault
Dashboard light "Engine Failure Hazard," "Battery Charging Fault," and "Check ESC/Hill Start". The engine occasionally cuts out randomly when idling or while driving. What I’ve Done So Far: Replaced the battery (AGM). Checked alternator voltage (reading approx. 14.6v).
. It often triggers a cascade of dashboard warnings like "Engine Failure," "Battery Charging Fault," and "Check ESC". The fault is intermittent
Look for water ingress or corrosion in the under-bonnet fuse box. Wiring Loom:
. If you've had this, was it a specific fuse box (UPC) failure or a chafed wire? Any advice on which pins to back-probe or common loom rub points would be hugely appreciated! Quick Diagnostic Tips for DTCC 10000: Check the UPC: Has anyone fixed this specific DTCC 10000 code
main power supply or UPC (Under-Bonnet Protection and Switching Unit) issue