Epson L4150 L4160 L4170 Resetter Adjustment Program [BEST]

def connect_printer(self): """Connect to the printer""" if not self.port_combo.get(): messagebox.showerror("Error", "Please select a COM port") return try: self.serial_port = serial.Serial( port=self.port_combo.get(), baudrate=int(self.baud_combo.get()), bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=3 ) # Initialize printer self.send_command(self.CMD_INITIALIZE) time.sleep(0.5) # Get printer info self.get_printer_info() self.connected = True self.status_label.config(text="● Connected", foreground="green") self.connect_btn.config(state=tk.DISABLED) self.disconnect_btn.config(state=tk.NORMAL) self.reset_pad_btn.config(state=tk.NORMAL) self.reset_all_btn.config(state=tk.NORMAL) self.log_message("Connected to printer successfully") self.get_counters() except serial.SerialException as e: messagebox.showerror("Connection Error", f"Failed to connect: {str(e)}") self.log_message(f"Connection failed: {str(e)}") except Exception as e: messagebox.showerror("Error", f"Unexpected error: {str(e)}")

def log_message(self, message): """Add message to log with timestamp""" timestamp = datetime.now().strftime("%Y-%m-%d %H:%M:%S") log_entry = f"[{timestamp}] {message}\n" self.log_text.insert(tk.END, log_entry) self.log_text.see(tk.END) # Limit log size if int(self.log_text.index('end-1c').split('.')[0]) > 1000: self.log_text.delete(1.0, 500.0) class EpsonResetterAdvanced: """Advanced features for Epson resetter""" Epson L4150 L4160 L4170 Resetter Adjustment Program

def reset_pad_counter(self): """Reset waste ink pad counter""" if not self.connected: messagebox.showwarning("Warning", "Printer not connected") return if not messagebox.askyesno("Confirm Reset", "WARNING: Resetting the waste ink counter without replacing the\n" "waste ink pads may cause ink leakage and printer damage.\n\n" "Have you replaced the waste ink pads?\n\n" "Proceed with reset?"): return def reset(): self.progress.start() try: # Send reset command response = self.send_command(self.CMD_RESET_COUNTER, 16) if response: self.log_message("Pad counter reset command sent successfully") time.sleep(1) self.get_counters() # Refresh counters messagebox.showinfo("Success", "Waste ink pad counter has been reset!") else: raise Exception("No response from printer") except Exception as e: self.log_message(f"Reset failed: {str(e)}") messagebox.showerror("Error", f"Reset failed: {str(e)}") finally: self.progress.stop() threading.Thread(target=reset, daemon=True).start() f"Unexpected error: {str(e)}") def log_message(self

# Command codes for Epson protocol CMD_RESET_COUNTER = b'\x1B\x40\x1B\x52\x00\x00\x00\x00' CMD_GET_COUNTER = b'\x1B\x40\x1B\x52\x01\x00\x00\x00' CMD_INITIALIZE = b'\x1B\x40' CMD_STATUS = b'\x1B\x40\x1B\x52\x02\x00\x00\x00' sticky=tk.W) self.port_combo = ttk.Combobox(conn_frame

import tkinter as tk from tkinter import ttk, messagebox, filedialog import serial import serial.tools.list_ports import time import threading import struct import hashlib import os import json from datetime import datetime class EpsonResetter: """Epson Printer Resetter for L4150/L4160/L4170"""

def __init__(self, parent): self.parent = parent self.serial_port = None self.current_model = None self.connected = False self.setup_ui() def setup_ui(self): """Setup the main user interface""" self.parent.title("Epson Resetter Adjustment Program v2.0") self.parent.geometry("800x600") self.parent.resizable(True, True) # Set style style = ttk.Style() style.theme_use('clam') # Main container main_frame = ttk.Frame(self.parent, padding="10") main_frame.grid(row=0, column=0, sticky=(tk.W, tk.E, tk.N, tk.S)) # Connection Frame conn_frame = ttk.LabelFrame(main_frame, text="Printer Connection", padding="10") conn_frame.grid(row=0, column=0, columnspan=2, sticky=(tk.W, tk.E), pady=5) ttk.Label(conn_frame, text="COM Port:").grid(row=0, column=0, sticky=tk.W) self.port_combo = ttk.Combobox(conn_frame, values=self.get_serial_ports(), width=15) self.port_combo.grid(row=0, column=1, padx=5) ttk.Label(conn_frame, text="Baud Rate:").grid(row=0, column=2, sticky=tk.W, padx=(20,0)) self.baud_combo = ttk.Combobox(conn_frame, values=[9600, 19200, 38400, 115200], width=10) self.baud_combo.set(9600) self.baud_combo.grid(row=0, column=3, padx=5) self.connect_btn = ttk.Button(conn_frame, text="Connect", command=self.connect_printer) self.connect_btn.grid(row=0, column=4, padx=10) self.disconnect_btn = ttk.Button(conn_frame, text="Disconnect", command=self.disconnect_printer, state=tk.DISABLED) self.disconnect_btn.grid(row=0, column=5) # Status indicator self.status_label = ttk.Label(conn_frame, text="● Disconnected", foreground="red") self.status_label.grid(row=0, column=6, padx=(20,0)) # Printer Info Frame info_frame = ttk.LabelFrame(main_frame, text="Printer Information", padding="10") info_frame.grid(row=1, column=0, columnspan=2, sticky=(tk.W, tk.E), pady=5) ttk.Label(info_frame, text="Model:").grid(row=0, column=0, sticky=tk.W) self.model_var = tk.StringVar() ttk.Label(info_frame, textvariable=self.model_var, font=("Arial", 10, "bold")).grid(row=0, column=1, sticky=tk.W) ttk.Label(info_frame, text="Firmware:").grid(row=0, column=2, sticky=tk.W, padx=(20,0)) self.firmware_var = tk.StringVar() ttk.Label(info_frame, textvariable=self.firmware_var).grid(row=0, column=3, sticky=tk.W) ttk.Label(info_frame, text="Serial:").grid(row=1, column=0, sticky=tk.W) self.serial_var = tk.StringVar() ttk.Label(info_frame, textvariable=self.serial_var).grid(row=1, column=1, sticky=tk.W) # Counter Display Frame counter_frame = ttk.LabelFrame(main_frame, text="Waste Ink Counters", padding="10") counter_frame.grid(row=2, column=0, columnspan=2, sticky=(tk.W, tk.E, tk.N, tk.S), pady=5) # Create treeview for counters columns = ('Counter', 'Current Value', 'Maximum', 'Percentage') self.counter_tree = ttk.Treeview(counter_frame, columns=columns, show='headings', height=5) for col in columns: self.counter_tree.heading(col, text=col) self.counter_tree.column(col, width=150) scrollbar = ttk.Scrollbar(counter_frame, orient=tk.VERTICAL, command=self.counter_tree.yview) self.counter_tree.configure(yscrollcommand=scrollbar.set) self.counter_tree.grid(row=0, column=0, sticky=(tk.W, tk.E, tk.N, tk.S)) scrollbar.grid(row=0, column=1, sticky=(tk.N, tk.S)) ttk.Button(counter_frame, text="Refresh Counters", command=self.get_counters).grid(row=1, column=0, pady=10) # Reset Actions Frame reset_frame = ttk.LabelFrame(main_frame, text="Reset Operations", padding="10") reset_frame.grid(row=3, column=0, columnspan=2, sticky=(tk.W, tk.E), pady=5) # Reset buttons self.reset_pad_btn = ttk.Button(reset_frame, text="Reset Waste Ink Pad Counter", command=self.reset_pad_counter, state=tk.DISABLED, style="Danger.TButton") self.reset_pad_btn.grid(row=0, column=0, padx=5, pady=5) self.reset_all_btn = ttk.Button(reset_frame, text="Reset All Counters", command=self.reset_all_counters, state=tk.DISABLED) self.reset_all_btn.grid(row=0, column=1, padx=5, pady=5) # Progress bar self.progress = ttk.Progressbar(main_frame, mode='indeterminate') self.progress.grid(row=4, column=0, columnspan=2, sticky=(tk.W, tk.E), pady=10) # Log Frame log_frame = ttk.LabelFrame(main_frame, text="Operation Log", padding="10") log_frame.grid(row=5, column=0, columnspan=2, sticky=(tk.W, tk.E, tk.N, tk.S), pady=5) self.log_text = tk.Text(log_frame, height=10, wrap=tk.WORD) scroll_log = ttk.Scrollbar(log_frame, orient=tk.VERTICAL, command=self.log_text.yview) self.log_text.configure(yscrollcommand=scroll_log.set) self.log_text.grid(row=0, column=0, sticky=(tk.W, tk.E, tk.N, tk.S)) scroll_log.grid(row=0, column=1, sticky=(tk.N, tk.S)) # Configure grid weights self.parent.columnconfigure(0, weight=1) self.parent.rowconfigure(0, weight=1) main_frame.columnconfigure(0, weight=1) main_frame.rowconfigure(2, weight=1) main_frame.rowconfigure(5, weight=1) counter_frame.columnconfigure(0, weight=1) counter_frame.rowconfigure(0, weight=1) log_frame.columnconfigure(0, weight=1) log_frame.rowconfigure(0, weight=1) # Create custom styles style.configure("Danger.TButton", foreground="red") def get_serial_ports(self): """Get list of available serial ports""" ports = serial.tools.list_ports.comports() return [port.device for port in ports]

def get_printer_info(self): """Get printer information""" try: # Send status request response = self.send_command(self.CMD_STATUS, 64) if response and len(response) >= 32: # Parse model from response model_str = response[8:24].decode('ascii', errors='ignore').strip('\x00') # Detect model for model in self.SUPPORTED_MODELS.keys(): if model in model_str: self.current_model = model self.model_var.set(model) break else: self.model_var.set("Unknown") # Parse firmware firmware = f"{response[24]:02d}.{response[25]:02d}" self.firmware_var.set(firmware) # Parse serial (mock parsing) serial_num = response[16:24].hex().upper() self.serial_var.set(serial_num) self.log_message(f"Printer detected: {self.model_var.get()} (FW: {firmware})") except Exception as e: self.log_message(f"Failed to get printer info: {str(e)}")