Schematic - Mb1364

Without the official Fujitsu blueprint, repairing a circuit with the MB1364 is a game of "pin probing and guessing." If you have a copy of the actual internal schematic, please scan it and upload it to Archive.org. For the rest of us, use the pinout above and check your local VCR repair shops for dead donor boards.

October 26, 2023 Category: Vintage Electronics / Module Repair mb1364 schematic

| Pin | Symbol | Function | Typical Voltage | | :--- | :--- | :--- | :--- | | 1 | Vcc | Supply voltage (via dropping resistor) | 12V - 15V | | 2 | GND | Ground | 0V | | 3 | FB | Feedback from secondary side (opto) | 2.5V (Reference) | | 4 | Out | Driver to switching transistor (Base) | 0.6V / 1.4V switching | | 5 | CS | Current sense (connects to emitter resistor) | < 1V | | 6 | NC | Not connected (isolation slot) | - | Without the official Fujitsu blueprint, repairing a circuit