Qfx | Default Password

load factory-default commit The root password is cleared. The switch reverts to root: (blank).

set system login user admin uid 2000 set system login user admin class super-user set system login user admin authentication plain-text-password # (set admin password) set system root-authentication ssh-rsa "ssh-rsa AAAAB3..." # key-only, or set system root-authentication load-key-file /var/tmp/root_key.pub delete system root-authentication plain-text-password 4.3 Enforcing Password Policies set system login password format sha512 set system login password minimum-length 12 set system login password change-type user-set 4.4 Saving Configuration to Prevent Reversion After committing, save to both rescue and backup:

Press Enter . You will see:

- name: Configure QFX junipernetworks.junos.junos_config: host: " inventory_hostname " user: root passwd: "" # EMPTY PASSWORD src: config.conf – Use SSH keys or vault-encrypted temporary credentials. 6.2 Zero Touch Provisioning (ZTP) In ZTP, the switch gets an IP from DHCP and downloads a configuration file. That file must include a root password or, better, disable root login entirely. If the ZTP config does not set authentication, the switch remains vulnerable. Part 7: Common Misconceptions Myth 1: “QFX has a default password like juniper or juniper123 ” Fact: Juniper never shipped QFX with a manufacturer-set password. The only “default” is blank for root. Myth 2: “If I set a password once, it stays forever” Fact: Factory reset, load factory-default , or certain recovery operations clear it. Myth 3: “The management port is isolated, so no risk” Fact: Insider threats, misconfigured VLANs, and rogue devices on the same management segment can exploit blank passwords. Part 8: Auditing Your QFX Fleet for Default Passwords Use this operational script to check for blank root passwords across your QFX devices:

loader> boot -s Enter full pathname of shell: /bin/sh # mount -t msdosfs /dev/da0s1 /mnt # vi /mnt/etc/master.passwd # (remove the password hash after root::) # reboot This is complex and requires physical or out-of-band console access. 6.1 Ansible and Default Passwords When using Ansible to initially provision QFX switches, never rely on a default blank password. Instead, use console-based first-time setup or pre-staged SSH keys via USB autoinstall. qfx default password

request system configuration rescue save request system snapshot slice alternate # for dual-root partitions 5.1 Reloading Factory Defaults If an engineer issues:

(insecure playbook snippet):

#!/bin/bash # qfx_check_default_pass.sh SWITCHES="qfx1 qfx2 spine1 spine2" for sw in $SWITCHES; do echo -n "$sw: " ssh -o BatchMode=yes -o ConnectTimeout=3 root@$sw "show version" 2>/dev/null && \ echo "SUCCESS (has SSH key)" || \ sshpass -p '' ssh -o StrictHostKeyChecking=no root@$sw "show version" 2>/dev/null && \ echo "FAIL - DEFAULT PASSWORD" || \ echo "OK - password protected or unreachable" done Alternatively, use Juniper’s health or audit automation scripts from the Junos Space platform. The QFX default password is not a secret—it’s the absence of a secret. A blank root password is a default that must be changed on day zero, hour zero, minute zero . In modern data centers, where east-west traffic dominates and compromised switches can eavesdrop on VXLAN tunnels, leaving a QFX with no password is equivalent to leaving the data center door unlocked with a sign saying “Valuable Servers Inside.”