Document ID: PWS-SCRIPT-V1.0 Type: Technical Design Document (TDD) / Pseudocode Implementation 1. Abstract This document outlines the core script logic for a Pressure Washer Simulator . The script manages three primary systems: Machine Physics (pressure/temperature), Cleaning Mechanics (dirt degradation), and Progression (rewards/upgrades). The architecture follows an event-driven model to maintain separation between user input (mouse/keyboard/controller) and visual feedback (particle effects/mesh decals). 2. Core Variables Declaration // --- Machine State --- float current_psi = 0.0 // Current water pressure (0 to 1500) float current_temp = 20.0 // Water temperature in Celsius (Ambient to 100) float soap_level = 0.0 // 0 to 100% float fuel_level = 100.0 // 0 to 100% // --- Nozzle Settings --- enum NozzleType { RED(0), YELLOW(15), GREEN(25), WHITE(40), SOAP(50) } NozzleType active_nozzle = GREEN float spray_angle = 25.0 // Degrees (narrow vs wide) float impact_force = 1.0 // Multiplier for dirt removal
// 2. Calculate cleaning power float cleaning_power = CalculateCleaningPower()
function PurchaseUpgrade(upgrade_id): int cost = GetUpgradeCost(upgrade_id) if coins >= cost: coins -= cost switch upgrade_id: case "Pressure+": pressure_upgrade += 0.2 current_psi = 1200 * pressure_upgrade case "Heater+": heat_upgrade += 0.25 max_temp = 100 * heat_upgrade case "Fuel Tank": fuel_capacity += 0.3 max_fuel = 100 * fuel_capacity SaveProgress() return true else: PlaySound("error_deny") return false // Called when a surface reaches 100% clean function OnSurfaceCleaned(surface): PlaySound("achievement_ding") SpawnParticles("sparkle", surface.center) player_score += 500 // Completion bonus CheckAllSurfaces() // See if level is done // Debug console commands function DebugCommand(command): if command == "refill": RefillResources() if command == "max_power": current_psi = 5000 if command == "complete_level": for each surface in scene_surfaces: surface.dirt_amount = 0.0 10. Conclusion This script provides a robust foundation for a Pressure Washer Simulator. It balances arcade feedback (combo system, score) with mechanical simulation (overheating, fuel, nozzle selection). The modular design allows easy expansion for new dirt types (chewing gum, graffiti) or power-ups (turbo boost, foam cannon). Script do Simulador de Lavagem de Pressao
function InitializeSimulator(): current_psi = 300.0 // Start with medium pressure current_temp = 20.0 // Cold water active_nozzle = NozzleType.GREEN fuel_level = 100.0 soap_level = 100.0 is_overheated = false combo_timer = 0.0 // Reset all dirt decals on surfaces for each surface in scene_surfaces: surface.dirt_amount = GetInitialDirtByLevel(current_level)
function UpdateTemperature(delta_time, cleaning_power): // Heat generation: more power = more heat float heat_generated = cleaning_power * 0.05 * delta_time // Passive cooling float cooling = 15.0 * delta_time // 15°C per second idle Document ID: PWS-SCRIPT-V1
// --- Cleaning System --- float dirt_resistance = 0.0 to 1.0 (0 = clean, 1 = muddy) float heat_effectiveness = 0.5 // Hotter water cleans grease faster
// 4. Visual & Audio feedback if dirt_removed > 0: SpawnDirtParticles(hit_point, dirt_removed) PlaySound("pressure_hiss", volume = cleaning_power / 100) UpdateComboSystem(dirt_removed) player_score += dirt_removed * 10 The architecture follows an event-driven model to maintain
float final_power = base * nozzle_mod * temp_mod
// Clamp limits current_temp = Clamp(current_temp, 20.0, 100.0)