Script Rf24- Alcance De Arranque- Alcance De Gk... -

Since "GK" in Spanish football/sports means ( Guarda-Redas ), but in electronics could be a custom variable, I’ll provide a structured technical explanation focused on RF24 range testing , startup range calibration , and "GK" interpreted as a range threshold for signal quality .

// Optional: compute packet loss rate over 100 packets // If loss > 50% => that distance is beyond GK range.

// TX side pseudo‑code void measureRange() for (int power = RF24_PA_MIN; power <= RF24_PA_MAX; power++) radio.setPALevel(power); delay(100); int successCount = 0; for (int i = 0; i < 50; i++) if (radio.write(&testPayload, sizeof(testPayload))) successCount++; delay(10); float successRate = successCount / 50.0; Serial.print("Power level "); Serial.print(power); Serial.print(" success rate: "); Serial.println(successRate); if (successRate >= 0.5) Serial.println("GK range achieved at this power level."); break; Script RF24- alcance de arranque- alcance de GK...

// Range thresholds int startupRangeOK = 0; // distance where first ACK received int GKrange = 0; // distance where packet loss > 50%

if (success) Serial.print("ACK received. Payload: "); Serial.println(payload); // Here you would update startupRangeOK or GKrange based on distance input // For manual testing: enter distance from serial monitor else Serial.println("Transmission failed – beyond GK range?"); Since "GK" in Spanish football/sports means ( Guarda-Redas

void loop() static unsigned long lastSend = 0; if (millis() - lastSend >= 1000) lastSend = millis();

// Send a simple counter static int payload = 0; payload++; bool success = radio.write(&payload, sizeof(payload)); Payload: "); Serial

void setup() Serial.begin(9600); radio.begin(); radio.setChannel(100); radio.setPALevel(RF24_PA_MAX); // start with max power radio.setDataRate(RF24_250KBPS); // slower rate = longer range radio.openWritingPipe(address); radio.stopListening();