| Problem | Likely Cause | Solution | |---------|--------------|----------| | No signal / constant beep | Started over a stud | Move 6–12 inches away, recalibrate. | | Inconsistent detection | User moved during calibration | Recalibrate without moving. | | WireWarning always on | Live wires nearby | Scan in another area; avoid drilling. | | Won’t power on | Dead battery or corrosion | Replace 9V battery, clean terminals. |
Here’s a concise, helpful write-up for the based on its typical features and manual instructions. (Note: Always refer to your physical manual for model-specific details, as “400” may refer to a regional or older variant of the FatMax line.) Stanley FatMax Stud Finder 400: User Write-Up & Quick Reference Overview The Stanley FatMax Stud Finder 400 is a handheld electronic device designed to locate the edges of wood and metal studs behind drywall, plaster, or lath. It’s known for its deep-scanning capability (up to 1.5 inches / 38 mm) and an easy-to-read LED display. This model is ideal for hanging heavy mirrors, cabinets, shelving, or TVs. stanley fatmax stud finder 400 manual