Tower | Crane Foundation Design Calculation Example
7.0 m × 7.0 m × 1.5 m thick. 5. Stability Checks 5.1 Overturning (ULS) [ M_overturning,ULS = M_d = 6300 , \textkNm ] Restoring moment (about edge): [ M_restoring = N_total,ULS \times \fracL2 = (1148 + 1837.5) \times 3.5 = 2985.5 \times 3.5 = 10449 , \textkNm ] Factor of safety: [ FOS = \frac104496300 = 1.66 > 1.5 \quad \text✓ OK ] 5.2 Sliding (ULS) Sliding force (H_d = 97.5 , \textkN) Friction resistance: (\mu = 0.45) (concrete on stiff clay) [ R_friction = N_total,ULS \times \mu = 2985.5 \times 0.45 = 1343.5 , \textkN ] [ FOS_sliding = 1343.5 / 97.5 = 13.8 \gg 1.5 \quad \text✓ OK ] 6. Structural Design of Pad (ULS) 6.1 Bending moment at column base interface Ultimate bearing pressure distribution (simplified for ULS) – Use factored loads and effective area.
Moment about column edge = pressure resultant × lever arm. Use trapezoidal distribution? For simplicity, take average pressure = (204.5 + 0)/2? No, partial uplift. Actually, use effective width method:
Reinforcement required (per meter width, approximate): [ d = t - cover - \phi/2 = 1500 - 75 - 16 = 1409 , \textmm ] [ A_s = \fracM_Ed0.87 f_yk \times 0.9 d = \frac4473\times10^60.87\times500\times0.9\times1409 \times (1/7m)?? ] Let’s compute :
Overturning moment includes wind, eccentric lifting, and dynamic effects. 4. Foundation Sizing – Bearing Pressure Check (SLS) 4.1 Self-weight of foundation [ W_conc = L \times B \times t \times \gamma_conc = 6.0 \times 6.0 \times 1.2 \times 25 = 1080 , \textkN ] Soil above base (ignore – removed during excavation and not replaced for simplicity – conservative). 4.2 Total vertical load (SLS) [ N_total = V_k + W_conc = 850 + 1080 = 1930 , \textkN ] 4.3 Eccentricity [ e = \fracM_kN_total = \frac42001930 = 2.176 , \textm ] Tower Crane Foundation Design Calculation Example
For 7 m square, 2.5 m projection, (M_Ed \approx 0.5 \times q_max \times B \times c^2 = 0.5 \times 204.5 \times 7 \times 6.25 = 4473 , \textkNm) – that’s total moment.
[ W_conc = 7\times7\times1.5\times25 = 1837.5 , \textkN ] [ N_total = 850 + 1837.5 = 2687.5 , \textkN ] [ e = 4200 / 2687.5 = 1.563 , \textm ] [ L/6 = 7/6 = 1.167 , \textm; \quad e > L/6 \rightarrow \textstill partial uplift ] [ L' = 3\times(3.5 - 1.563) = 5.811 , \textm ] [ q_max = \frac2\times2687.57 \times 5.811 = \frac537540.677 \approx 132.2 , \textkPa < 150 , \textkPa \quad \text✓ OK ]
This exceeds (q_allow = 150 , \textkPa) → or must be deepened or widened. 4.5 Revised foundation size Try (L = B = 7.0 , \textm, t = 1.5 , \textm): Structural Design of Pad (ULS) 6
Cantilever projection from column edge to foundation edge: [ c = (7.0 - 2.0)/2 = 2.5 , \textm ] Average pressure under cantilever (triangular variation) – Use integration: Equivalent linear pressure distribution – conservative approach: [ M_Ed = q_max,ULS \times B \times \fracc^22 \times \text(shape factor) ] Simplified: (M_Ed \approx 204.5 \times 7.0 \times \frac2.5^22 = 204.5 \times 7.0 \times 3.125 = 4473 , \textkNm/m width?) – Wait, that’s too high – correct method:
Moment per meter width: [ M_Ed = q_max \times \fracc^22 \times \texteffective width factor ] Better to compute total moment = integral of pressure × distance. Given complexity, use standard formula from crane manuals:
Provide T20 @ 200 mm c/c (both directions top and bottom) → (A_s = 1570 , \textmm^2/m) ✓. Maximum tension per bolt from overturning (ULS): [ T_bolt = \fracM_dn \times r - \fracV_dn ] where (n=12) bolts, (r) = bolt circle radius ≈ 1.5 m. Approximate: [ T = \frac630012 \times 1.5 = 350 , \textkN \quad\text(ignoring vertical load compression) ] Check bolt capacity (M36, 8.8): (A_s = 817 , \textmm^2), (f_yb = 640 , \textMPa) [ N_Rd = 0.9 \times A_s \times f_yb / \gamma_M2 = 0.9\times817\times640 / 1.25 = 376 , \textkN > 350 , \textkN \quad \text✓ OK ] 8. Settlement Analysis Using elastic settlement for stiff clay ((E_s \approx 30 , \textMPa), (\nu=0.35)): For simplicity, take average pressure = (204
Maximum moment at crane column face (assume column base plate 2 m × 2 m):
Net bearing pressure at SLS = (q_max \approx 132.2 , \textkPa) Influence factor (I_s) for square footing ≈ 0.88 [ \delta = q_max \times B \times \frac1-\nu^2E_s \times I_s = 132.2 \times 7 \times \frac1-0.122530000 \times 0.88 ] [ \delta \approx 132.2\times7\times0.8775/30000\times0.88 = 0.0239 , \textm = 23.9 , \textmm ]
